03 8只LED左右来回点亮
/* 名称：8只LED左右来回点亮
说明：程序利用循环移位函数_crol_和_cror_形成来回滚动的效果
*/
#include
#include
#define uchar unsigned char
#define uint unsigned int
//延时
void DelayMS(uint x)
{
uchari;
while(x--)
{
for(i=0;i<120;i++);
}
}
//主程序
void main()
{
uchari;
P2=0x01;
while(1)
{
for(i=0;i<7;i++)
{
P2=_crol_(P2,1);//P2的值向左循环移动
DelayMS(150);
}
for(i=0;i<7;i++)
{
P2=_cror_(P2,1);//P2的值向右循环移动
DelayMS(150);
}
}
}
04 花样流水灯
/* 名称：花样流水灯
说明：16只LED分两组按预设的多种花样变换显示
*/
#include
#define uchar unsigned char
#define uint unsigned int
uchar code Pattern_P0[]=
{
0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,
0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,
0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
uchar code Pattern_P2[]=
{
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf9,0xf3,0xe7,0xcf,0x9f,0x3f,0xff,
0xe7,0xdb,0xbd,0x7e,0xbd,0xdb,0xe7,0xff,0xe7,0xc3,0x81,0x00,0x81,0xc3,0xe7,0xff,
0xaa,0x55,0x18,0xff,0xf0,0x0f,0x00,0xff,0xf8,0xf1,0xe3,0xc7,0x8f,0x1f,0x3f,0x7f,
0x7f,0x3f,0x1f,0x8f,0xc7,0xe3,0xf1,0xf8,0xff,0x00,0x00,0xff,0xff,0x0f,0xf0,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f,
0x7f,0xbf,0xdf,0xef,0xf7,0xfb,0xfd,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe,0xfc,0xf8,0xf0,0xe0,0xc0,0x80,0x00,
0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,
0x00,0xff,0x00,0xff,0x00,0xff,0x00,0xff
};
//延时
void DelayMS(uint x)
{
uchari;
while(x--)
{
for(i=0;i<120;i++);
}
}
//主程序
void main()
{
uchari;
while(1)
{ //从数组中读取数据送至P0和P2口显示
for(i=0;i<136;i++)
{
P0=Pattern_P0[i];
P2=Pattern_P2[i];
DelayMS(100);
}
}
}
05 LED模拟交通灯
/* 名称：LED模拟交通灯
说明：东西向绿灯亮若干秒，黄灯闪烁5次后红灯亮， 红灯亮后，南北向由红灯变为绿灯，若干秒后南北向黄灯闪烁5此后变红灯，东西向变绿灯，如此重复。
*/
#include
#define uchar unsigned char
#define uint unsigned int
sbit RED_A=P0^0; //东西向灯
sbit YELLOW_A=P0^1;
sbit GREEN_A=P0^2;
sbit RED_B=P0^3; //南北向灯
sbit YELLOW_B=P0^4;
sbit GREEN_B=P0^5;
uchar Flash_Count=0,Operation_Type=1; //闪烁次数，操作类型变量
//延时
void DelayMS(uint x)
{
uchari;
while(x--)for(i=0;i<120;i++);
}
//交通灯切换
void Traffic_Light()
{
switch(Operation_Type)
{
case1: //东西向绿灯与南北向红灯亮
RED_A=1;YELLOW_A=1;GREEN_A=0;
RED_B=0;YELLOW_B=1;GREEN_B=1;
DelayMS(2000);
Operation_Type=2;
break;
case2: //东西向黄灯闪烁，绿灯关闭
DelayMS(300);
YELLOW_A=~YELLOW_A;GREEN_A=1;
if(++Flash_Count!=10)return; //闪烁5次
Flash_Count=0;
Operation_Type=3;
break;
case3: //东西向红灯，南北向绿灯亮
RED_A=0;YELLOW_A=1;GREEN_A=1;
RED_B=1;YELLOW_B=1;GREEN_B=0;
DelayMS(2000);
Operation_Type=4;
break;
case4: //南北向黄灯闪烁5次
DelayMS(300);
YELLOW_B=~YELLOW_B;GREEN_B=1;
if(++Flash_Count!=10)return;
Flash_Count=0;
Operation_Type=1;
}
}
//主程序
void main()
{
while(1)Traffic_Light();
}
06 单只数码管循环显示0~9
/* 名称：单只数码管循环显示0~9
说明：主程序中的循环语句反复将0~9的段码送至P0口，使数字0~9循环显示
*/
#include
#include
#define uchar unsigned char
#define uint unsigned int
uchar codeDSY_CODE[]={0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xff};
//延时
void DelayMS(uint x)
{
uchart;
while(x--)for(t=0;t<120;t++);
}
//主程序
void main()
{
uchari=0;
P0=0x00;
while(1)
{/* for(;i<11;i++){ P0=~DSY_CODE[i]; DelayMS(300);} //注:另一方案 */
P0=~DSY_CODE[i];
i=(i+1)%10;
DelayMS(300);
}
}
;给你做一个单双各四个灯轮流点亮的程序吧，P0口
#include
#define uchar unsigned char
uchar num=0;
void t0isr() interrupt 1
{
TH0=(65536-50000)/256;
TL0=(65536-50000)%256;
num++;
if(num>=20)
{
P0=~P0;
num=0;
}
}
main()
{
TMOD=0x01;
TH0=(65536-50000)/256;
TL0=(65536-50000)%256;
TR0=1;
EA=1;
P0=0x5a;
while(1);
}
89C52各位，请帮忙...
单片机的种类型号五花八门，单片机的定时器模型又五花八门，你的电路是LED高电平点亮还是低电平点亮又没说，所以。。答案=无解， 不知道你要问什么。
内容全部来源于网络收集，如有侵权，请联系网站删除：QQ：24596024