如下拓扑结构图，写出各路由器与交换机的配置，使所有的计算机之间可以正常通信，请使用 EIGRP路由协议

楼主，你好哇~
配置如下 ，这个很简单，翻翻CCNA看三天就会了。
——————————————————————————

路由器配置：
Router>en

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#interface f0/1

Router(config-if)#no shutdown

Router(config-if)#ip add 172.16.5.1 255.255.255.0

Router(config-if)#ip nat outside

Router(config-if)#exit

Router(config)#interface f0/0

Router(config-if)#no shutdown

Router(config-if)#ip address 172.16.4.2 255.255.255.0

Router(config-if)#ip nat inside

Router(config-if)#description -------LAN

Router(config-if)#exit

Router(config)#do wr

Building configuration...

[OK]

Router(config)#access-list 1 permit 172.16.0.0 0.0.255.255

Router(config)#ip nat inside source list 1 interface f0/1 overload

Router(config)#router eigrp 10

Router(config-router)#network 172.16.5.0 0.0.0.255

Router(config-router)#network 172.16.4.0 0.0.0.255

Router(config-router)#exit

Router(config)#do wr

Building configuration...

[OK]

Router(config)#hostname R1

R1(config)#do wr

Building configuration...

RCHANGE: IP-EIGRP 10: Neighbor 172.16.4.1 (FastEthernet0/0) is up: new adjacency

%DUAL-5-NBRCHANGE: IP-EIGRP 10: Neighbor 172.16.4.1 (FastEthernet0/0) is resync: graceful restart

R1(config)#router eigrp 10

R1(config-router)#no auto-summary

————————————————————
三层3560配置：
SW3#show run

Building configuration...

Current configuration : 1792 bytes

hostname SW3

ip dhcp excluded-address 172.16.2.1

ip dhcp excluded-address 172.16.3.1

ip dhcp pool 10

network 172.16.2.0 255.255.255.0

default-router 172.16.2.1

dns-server 202.103.24.68

ip dhcp pool 20

network 172.16.3.0 255.255.255.0

default-router 172.16.3.1

dns-server 202.103.24.68

ip routing

spanning-tree mode pvst

interface FastEthernet0/1

switchport trunk encapsulation dot1q

switchport mode trunk

interface FastEthernet0/2

switchport access vlan 2

interface Vlan1

no ip address

shutdown

!

interface Vlan2

ip address 172.16.4.1 255.255.255.0

!

interface Vlan10

ip address 172.16.2.1 255.255.255.0

!

interface Vlan20

ip address 172.16.3.1 255.255.255.0

!

router eigrp 10

network 172.16.4.0 0.0.0.255

network 172.16.2.0 0.0.0.255

network 172.16.3.0 0.0.0.255

no auto-summary
————————————————————
两个2层交换机 2950配置；
Switch>en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname SW2
SW2(config)#interface f0/3
SW2(config-if)#switchport mode trunk

SW2(config-if)#switchport trunk allowed vlan all
SW2(config-if)#exit

SW2(config)#vtp mode client
Setting device to VTP CLIENT mode.

SW2(config)#vtp domain bd
Domain name already set to bd.

SW2(config)#vtp pa

SW2(config)#vtp password bd

Setting device VLAN database password to bd
SW2(config)#interface f0/1
SW2(config-if)#switchport mode access
SW2(config-if)#switchport access vlan 10
SW2(config-if)#exit

SW2(config)#interface f0/2
SW2(config-if)#switchport mode a

SW2(config-if)#switchport mode access

SW2(config-if)#switchport access vlan 20

SW2(config-if)#exit
SW2(config)#ip default-gateway 172.16.4.1
SW2(config)#interface f0/24

SW2(config-if)#switchport mode trunk

SW2(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to up
SW2(config-if)#switchport trunk allowed vlan all
SW2(config-if)#exit

————————————————————

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)#hostname SW1
SW1(config)#interface f0/24
SW1(config-if)#switchport mode trunk
SW1(config-if)#switchport trunk allowed vlan all
SW1(config-if)#exit
SW1(config)#vtp mode client
SW1(config)#vtp domain bd
Domain name already set to bd.
SW1(config)#vtp password bd
Setting device VLAN database password to bd
SW1(config)#interface f0/1
SW1(config-if)#switchport mode access vlan 10
^
% Invalid input detected at '^' marker.
SW1(config-if)#switchport mode access
SW1(config-if)#switchport access vlan 10
SW1(config-if)#exit
SW1(config)#interface f0/2
SW1(config-if)#switchport mode access
SW1(config-if)#switchport access vlan 20

SW1(config)#ip default-gateway 172.16.4.1

SW1(config)#do wr