急求中文简历翻译成英文

2025-02-15 09:41:23

推荐回答（3个）

回答1：

是:

Resume
Position: Injection head

Overview:
Management experience and capabilities:
1 "11 years of injection molding production and management experience in the department and the project has a strong planning, co-ordination.
2 "proficient in a variety of physical and chemical properties of plastic materials and mold design and molding requirements.
3 "familiar with Mold flow, and from the product mix and mold structure predict will produce defects.
4 "has a very strong product defect analysis, processing product in the production process exception problem, the solution throughout the product structure, tooling, equipment, materials, environment, etc., experience very rich.
5 "in the optical lens molding has a deep theoretical knowledge and strong experience of actual control.
6 "plastic body made to understand the various principles and maintenance, adjustment and maintenance of injection molding machine has a deep theoretical knowledge and have a wealth of practical experience.
7 "to the mold with strong analysis ability, familiarity with a variety of cold and hot runner mold structure, able to mold the program to improve bad.
8 "to understand ERP principle of operation, familiar with the production scheduling and to follow-up in place.
9 "understand" 6S "on-site management and implementation, have received ISO9000, QS9000, JIT training (Fine Bo factory, one of ISO internal audit staff).
10 "have a stronger communication and coordination ability and good interpersonal skills and rigorous work of the wind.
11 "to understand the target management, quantitative management, and to develop sectoral long, medium and short-term plans, and can follow up the place.
12 "to the system of injection molding material, mold, equipment, process methods, production process control and comprehensive training.
13 "energy system to establish and improve the work of departments and job manuals, work guidelines and regulations and assessment programs.
14 "could reasonably be expected to digest outlet, reduce production costs and increase productivity.
15 "from the environment and operational methods and processes to improve the quality and stability.
From October 2006 to November 2007 working in the Sanyo home appliances
Company Property: Sino-Japanese joint-venture Number of employees: 1,000
Job: Injection Molding Division, products: home appliances under the Number: 150

Main duties:
1. Overall responsibility for the operational arrangements for the production of plastic injection department, organization and management, dealing with the daily affairs of this sector.
2. The new product structure review, the new model acceptance.
3. New and improved model.
4. Injection molding process development and control.
5. Arrange production according to production schedule and follow up the production schedule. To solve the quality of production processes in unexpected behavior.

Achievements:
1. The completion of all improvements and maintenance of production equipment, the realization of all mold is not achieved without plastic deformation bend.
2. Completed the Department's establishment of mold and technical files.
3. Improved departmental operations and work flow and production statistics network.
4. Perfecting every detail of injection molding manufacturing process control, eliminate product defects black spots.
5. The establishment of nozzle material batch management, and greatly improved quality and utilization of nozzle material.
6. The establishment of production process control systems and continuous improvement, breaking the PP material forming size instability, forming a pass rate of 60% from increased gradually over 95%.

From September 2003 to October 2006 worked in electronics factory, Dongguan Jing Bo
Company Property: Hong Kong-owned Number of employees: 3,000
Position: Injection in charge of production of products: cameras and small household electrical appliances under the number: 240

Main duties:
1. Has overall responsibility for the production of 76 sets injection molding machines and injection molding processes are developed daily affairs and control.
2. New and improved model.
3. The new product structure review, the new model acceptance.
4. According to PMC arrange production material requirements planning and follow up the production schedule. Address the quality of production processes in unexpected behavior.

Achievements:
1. To all the department managers to systematically carry out the injection molding material, mold, equipment, process methods, production technology, quality management
Training.
2. The development of sectoral and manual work for each job.
3. Improved departmental operations and work flow and production statistics network.
4. According to the work of the various manual jobs to establish performance appraisal program.
5. To re-draw the lens go a production environment, and the lens mold repair, maintenance, environmental control aspects of the lens forming a breakthrough
Pass rate also increased from around 70% and gradually increase to 90%, and the lens is close to the quality of the manufacture of Japan's Fuji
Standard.

大多数都95%正确.
希望能采纳我的答案.希望能幇到了你.

回答2：

如果你不是完全不懂，可以用机器翻，然后自己改。

恕我直言，
如果对方不需要你用外语入职，那写了也没有用；
如果对方要求具备足够的语言技能以胜任工作，
就算有网友为你代笔捉刀，难得还能代替你去面试替你去工作？

如果你打算依靠语言能力求职的话，
以你目前的水平，实在不敢恭维，建议你赶紧补上这一课。

回答3：

Each morning when I open my eyes Isay to myself,not events.have the power to make me happy or unhappy today.I can choose which it shall be.Yesterday is dead,tomorrow hasn't arrived yet.I have just one day.today,and I'm going to be happy in it"

最新问答

考前焦虑症的症状是什么样的?提供10条

下列营养物质中，可以不经过消化，在消化道内直接被吸收的是（　　）A．无机盐、维生素、氨基酸B．蛋白质

日语比较难学吗？怎么学好？

脚趾甲快掉了怎么办上个月穿人字拖撞着台阶了把小脚趾撞黑了结果一直黑没有变回来，，今天就掉了

tuang字怎么写?

无锡、昆山和上海周边县城，哪个地区将来的发展趋势会更好？

怎样才能解开心结？

请问风水大师，下面这个户型风水如何？是缺角还是凸出？

女朋友叫我别一天到晚打那么多电话给她，我好难受她这么说。怎么办？

历史上的围棋名局

急求 中文简历翻译成英文

急求中文简历翻译成英文